Formulated recipe

Ice cream sandwiches

Ice cream sandwiches, overhead view

Two soft biscuits that give at the same time as the ice cream, without splintering or snapping when you bite. The filling is your pick from all the house recipes.

Did you know?
Ways to make it— same mix, different method

Ingredients

For 1 kg

Tick each ingredient as you get it ready.

IngredientAmount%

Need to adjust the formula?

Step by step

9 steps · follow the order for the best result

Chef's notes

  • ·Do not skip the cold ageing: it hydrates proteins and stabiliser and clearly improves the texture.
  • ·The serving temperature depends on your recipe: if you formulate to a softer PAC than your freezer (say -11 °C with the chest at -18 °C), temper it for 5–10 min before serving; if the PAC matches your freezer, it can be eaten straight out.
  • ·Why formulate at -11 and not at -18 °C: even though your freezer sits at -18 °C, formulating at -11 makes the ice cream tastes better — at -18 it is so cold that the taste buds barely pick up the flavour and the fat is slow to melt in the mouth. And keeps better: ice cream formulated at -11 and kept at -18 has less free water, suffers less from Ostwald ripening (ice crystals joining and growing) and keeps its creaminess longer.
  • ·Keep your own notes: write down the POD and PAC that work best with your machine.
Result

The texture
spot on

The biscuit gives at the same time as the ice cream, without snapping or splintering: it takes up a little moisture and stays soft. The contrast plays out at the edge, where the ice cream shows cold and the biscuit has already softened.

High, stable creaminessFine structure, no crystalsBalance of sweetness and fat
Ice cream sandwiches, texture detail

Everything about
ice cream sandwiches

The ingredients and what each does

Every ingredient has a technical job: cream brings fat and creaminess, milk powder raises the non-fat solids, the sugars set the sweetness and the freezing point, and the stabiliser controls crystal growth during storage.

Technique and controlling the numbers

Adjusting the POD (sweetening power) and the PAC (antifreezing power, given as a target temperature) lets you match sweetness and hardness to your taste and your machine. With the selectors in the side bar the formula recalculates itself and you will see how the amount of each ingredient changes.

Storage and common mistakes

Store at -18 °C in an airtight container and avoid freeze-thaw cycles. The commonest faults are not ageing it enough, too much sugar so it never freezes properly, and over-churning, which whips in too much air and wrecks the texture.

Recommended for this recipe

Equipment and ingredients that make the difference.

Ad links: we link to Amazon. We are not an Amazon affiliate in your market yet, so we earn nothing from these links.

Answers to your questions

Frequently asked questions

Other recipes
you might like

Missing a sugar?

Tick the one you haven't got and which alternatives you do have. We'll tell you whether you can make it with what's there.

1 · Which one are you missing or want to replace?
2 · Which of these do you have?
Recipe
1

Ingredients

Butter180 g
Brown sugar120 g
Egg1 u
Soft wheat flour180 g
Baking powder5 g
Chocolate chips (optional)150 g

You choose the ice cream

The recipe does not tie you to any flavour: between the two biscuits goes whatever ice cream you like.

See all the ice cream recipes →

The biscuit

  1. Cream the butterBeat the softened butter and the brown sugar with the whisk.
  2. The eggAdd the egg.
  3. Flour and baking powderFold in the flour and the sifted baking powder.
  4. The chips, if you use themAdd the chips at this point if you are using them.
  5. Preheat to 180 °CPreheat the oven to 180 ºC.
  6. Roll out and bakeSpread them out well on baking parchment on a tray and bake at 180 ºC for about 10 minutes, or until they look done.
  7. Cut out the shapesCut the biscuits to the size of the mould.

The assembly

  1. Pick your ice creamFor the ice cream you can follow whichever recipe you like from the ice cream section.
  2. Into the moulds, fastStraight out of the machine it has to go quickly into the sandwich moulds and then into the freezer for at least 4 hours, better overnight.
  3. Fast-freeze before unmouldingIf your freezer has fast-freeze, put it on full at least 1 hour beforehand: if the ice cream isn't very hard it won't come out of the mould cleanly.
  4. Place the biscuitYou can put the bottom biscuit in the mould before pouring the ice cream, or add them afterwards.